Manual Type
- GS51 DIN FB REG
- GS51 DIN HW
- GS51 DIN REG
- GS51 FB REG
- GS51 HW
- GS51 REG
- GS51 SW REG
- GS55 FB REG
- GS55 HW
- GS55 REG
Pneumatic Type
GS51 HW

The G.S.51 diaphragm valve shown here is of the “conveyed flow” type with a loss of pressure below that of standard seat valves; according to the various operating conditions (which the user should kindly specify) the valve body can be cast iron, vulcanite and cast iron, glazed cast iron, light alloy, etc.; the diaphragm, in any case, consists of the material suitable for the specific service required from the valve. The head, complete with all control parts, consists of standard metals since the diaphragm protects it against any attack from fluids which the valve is supposed to control and check.?
?
The diaphragm is controlled in the opening and closing positions; as a result the valve can operate even under vacuum. It is recommended, on the other hand, never to exceed certain values of inner pressure also in connection with the valve size; users should specify on the enquiries, for this type of valves, the peak figures of pressure and temperature of the fluid with which the valves are in contact.?
?
The valves are available for flow diameters ranging from 15 to 350 mm; these valves are used extensively in chemical industries and chiefly in water’s treatment.


DETAILS |
|
---|---|
1 |
CONTROL WHEEL |
2 |
LEAD SCREW |
3 |
COVER |
4 |
HEXAGON NUT |
5 |
WASHER |
6 |
PLUG |
7 |
STUD BOLT |
8 |
DIAPHRAGM |
9 |
SOCKET |
10 |
GASKET |
11 |
BRONZE NUT |
12 |
VALVE BODY |
13 |
CLAMPING SCREW FOR BUSHING |
PRESSURE DETAILS UNI_1284 |
DN |
P.N. |
HYDRAULIC TEST Kg/cm2 |
WORKING PRESSURE Kg/cm2 |
---|---|---|---|---|
OPEN |
CLOSED |
|||
15 |
14 |
15 |
14 |
13 |
20 |
14 |
15 |
14 |
13 |
25 |
14 |
15 |
14 |
13 |
30 |
13 |
15 |
13 |
12 |
40 |
12,5 |
15 |
12,5 |
11,5 |
50 |
12,5 |
15 |
12,5 |
11,5 |
60 |
11 |
15 |
11 |
10 |
75 |
10,5 |
15 |
10,5 |
9,5 |
100 |
10,5 |
15 |
10,5 |
9,5 |
125 |
9 |
13 |
9 |
8 |
150 |
8,7 |
13 |
8,7 |
7,7 |
200 |
7 |
13 |
7 |
6 |
250 |
6 |
8 |
6 |
6 |
300 |
6 |
8 |
6 |
6 |
DIMENSIONS C.I. UNLINED |
||||
---|---|---|---|---|
Ø |
B |
C |
G(UNI) |
G(ASA) |
15 |
87,5 |
108 |
95 |
90 |
20 |
112,5 |
117 |
105 |
98 |
25 |
117,5 |
127 |
115 |
108 |
30 |
135 |
146 |
140 |
118 |
40 |
170 |
159 |
150 |
127 |
50 |
187,5 |
190 |
165 |
152 |
60 |
232,5 |
217 |
185 |
178 |
75 |
260 |
254 |
200 |
190 |
100 |
315 |
305 |
220 |
229 |
125 |
400 |
356 |
250 |
254 |
150 |
442,5 |
406 |
285 |
280 |
200 |
585 |
520 |
340 |
343 |
250 |
655 |
635 |
395 |
406 |
300 |
718 |
749 |
445 |
483 |
DIMENSIONS C.I. EBONITE LINED |
||||
---|---|---|---|---|
Ø |
B |
C |
G(UNI) |
G(ASA) |
15 |
92,5 |
114 |
95 |
90 |
20 |
117,5 |
123 |
105 |
98 |
25 |
122,5 |
133 |
115 |
108 |
30 |
140 |
152 |
140 |
118 |
40 |
175 |
165 |
150 |
127 |
50 |
192,5 |
196 |
165 |
152 |
60 |
237,5 |
227 |
185 |
178 |
75 |
265 |
260 |
200 |
190 |
100 |
320 |
313 |
220 |
229 |
125 |
405 |
364 |
250 |
254 |
150 |
447,5 |
414 |
285 |
280 |
200 |
590 |
530 |
340 |
343 |
250 |
660 |
645 |
395 |
406 |
300 |
723 |
759 |
445 |
483 |
WEIGHT KG |
|
---|---|
C.I. UNLINED |
C.I. EBONITE LINED |
2,300 |
2,400 |
3,800 |
3,900 |
4,000 |
4,100 |
6,600 |
6,700 |
8,000 |
8,300 |
12,000 |
12,400 |
17,000 |
17,600 |
23,000 |
24,000 |
36,500 |
98,000 |
56,000 |
55,700 |
76,500 |
76,200 |
144,000 |
142,000 |
225,000 |
226,000 |
330,000 |
350,000 |


DETAILS |
|
---|---|
1 |
CONTROL WHEEL |
2 |
LEAD SCREW |
3 |
COVER |
4 |
HEXAGON NUT |
5 |
WASHER |
6 |
PLUG |
7 |
STUD BOLT |
8 |
DIAPHRAGM |
9 |
SOCKET |
10 |
GASKET |
11 |
BRONZE NUT |
12 |
VALVE BODY |
13 |
CLAMPING SCREW FOR BUSHING |